DOOR LOCK ACTUATOR INSPECTION
| 1. |
Remove the door trim
panel. |
| 2. |
Disconnect the 6P connector from the
actuator.
|
| 3. |
Check actuator operation by connecting power
and ground according to the table. To prevent damage to the
actuator, apply battery voltage only momentarily.
|
DOOR LOCK SWITCH INSPECTION
| 1. |
Remove the door trim
panel. |
| 2. |
Disconnect the 6P connector from the
actuator. |
| 3. |
Check for continuity between the terminals in
each switch position according to the table.
|
